Help you reduce cost and time on PCB purchasing

Rogers RO3010 High Frequency PCB

Hi there,

Warm greetings.

 

Rogers 3010 PCBs are ceramic-filled PTFE composites intended for use in commercial microwave and RF applications. They were designed to offer exceptional electrical and mechanical stability at competitive prices, with dielectric constant value of 10.2.

 

Our PCB Capability (RO3010)

PCB Material:	Ceramic-filled PTFE composite
Designation:	RO3010
Dielectric constant:	10. 2 ±0.3 (process)
	11.2 (design)
Layer count:	2 Layer, Multilayer, Hybrid PCB
Copper weight:	0.5oz (17 µm), 1oz (35µm), 2oz (70µm)
PCB thickness:	5mil (0.127mm), 10mil (0.254mm),
	25mil (0.635mm), 50mil (1.27mm)
PCB size:	≤400mm X 500mm
Solder mask:	Green, Black, Blue, Yellow, Red etc.
Surface finish:	Bare copper, HASL, ENIG, OSP etc..

 

Typical applications

1. Automotive radar applications

2. Direct broadcast satellite

3. GPS Antennas

4. Patch antennas for wireless communications

5. Power amplifiers and antennas

 

We can provide you with prototype PCB, small runs and mass production service. If you are interested in RO3010 high frequency PCB, we are willing to share our price with you.

 

Thanks for your time to check this e-mail and hope to hearing from you soon.

 

Best regards

 

Ivy Deng | Business development

Bicheng PCB | website: www.rfpcb-board.com | Material partners: Rogers, Taconic, ITEQ, SHENGYI, KB, TAIYO, KUANGSHUN

 

If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as "remove" in the subject line.

Rogers RT/duroid 6010LM microwave PCBs

High Frequency PCB Made on RO4534 | Rogers 4534 RF PCB

Hi,

Good day. Hopefully this email finds you well.

 

RO4534 High Frequency PCBs are ceramic-filled, glass-reinforced hydrocarbon from Rogers Corporation, specifically engineered and manufactured to meet the specific demands of the antenna markets. It has a dielectric constant of 3.4 and a loss tangent (Df) of 0.0022 measured at 2.5 GHz. These values allow antenna designers to realize substantial gain values while minimizing signal loss. Thus, it provides excellent passive intermodulation response required for mobile infrastructure microstrip antenna applications.

 

Our PCB Capability (RO4534)

PCB Material:	Ceramic-filled, Glass-reinforced Hydrocarbon
Designation:	RO4534
Dielectric constant:	3.4
Dissipation Factor	0.0027 10GHz
Layer count:	Double Sided PCB, Multilayer PCB, Hybrid PCB
Copper weight:	0.5oz (17 µm), 1oz (35µm), 2oz (70µm)
Laminate thickness:	20mil (0.508mm), 30mil (0.762mm), 60mil (1.524mm  )
PCB size:	≤400mm X 500mm
Solder mask:	Green, Black, Blue, Yellow, Red etc.
Surface finish:	Bare copper, HASL, ENIG, Immersion silver, Immersion tin, OSP, Pure gold plated etc..

 

Typical Applications:

1. Cellular infrastructure base station antennas

2. WiMAX antenna networks

 

We can provide you with prototype, small batches and mass production service. If you are interested in the high frequency PCB made on RO4534, please feel free to send us back with your requirement. We'd love to share our price with you.

 

Best regards

 

Ivy Deng | Business development

Bicheng PCB | website: www.rfpcb-board.com | Material partners: Rogers, Taconic, ITEQ, SHENGYI, KB, TAIYO, KUANGSHUN

 

If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as "remove" in the subject line.

 

Bicheng is located at Baoan, Shenzhen, China 518103.

Taconic TLX-8 High Frequency PCB

Hi,

RO3035 PCB shows stable dielectric constant versus temperature and frequency. It's an ideal material for band pass filters, microstrip patch antennas, and voltage controlled oscillators.

 

If you are interested in high frequency PCB, we are willing to share our price with you.

 

Thanks for your time to check this e-mail and hope to hearing from you soon.

 

Best regards

 

Ivy Deng | Business development

Bicheng PCB | website: www.rfpcb-board.com | Material partners: Rogers, Taconic, ITEQ, SHENGYI, KB, TAIYO, KUANGSHUN

 

If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as "remove" in the subject line.

Package box&bag:2021-12-17 08:48:15

Hello Have a nice day. Does your company needs customized packaging boxes&bags for your products?  We are Chinese supplier who can produce customized packaging boxes & bag with custom logo. Any of your reply will be appreciated. Looking forward to your reply. Best regards,  Ben Email: ben@slcpackage.com SLC-PACKAGE CO. LTD www.slcpackages.com Always Serve you by Heart Contact Person: Ben What's App: 008613015695798 Wechat: 0086130156957 If you no longer wish to receive mail from us, you can Unsubscribe

Rogers RO3006 RF PCB

Hi,

RO3003 high frequency circuit boards are ceramic-filled PTFE composites intended for use in commercial microwave and RF applications. It has stable dielectric constant versus temperature and frequency. So it's ideal for band pass filters, microstrip patch antennas, and voltage controlled oscillators etc.

 

 

If you are interested in high frequency PCB, we are willing to share our price with you.

 

Thanks for your time to check this e-mail and hope to hearing from you soon.

 

Best regards

 

Ivy Deng | Business development

Bicheng PCB | website: www.rfpcb-board.com | Material partners: Rogers, Taconic, ITEQ, SHENGYI, KB, TAIYO, KUANGSHUN

 

If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as "remove" in the subject line.

6 Layer High Frequency PCB Built on RO4003C (20mil) + RO4450F

4 Layer High Frequency PCB Made on Rogers 60mil RO4350B and 10mil RO4350B

 

Hi,

This is a type of 4 layer high frequency PCB built on 2 cores of RO4350B and 1 sheet of prepreg (RO4450F) for the application of UHF coupler.

 

Basic specifications

Base material: RO4350B 60mil + RO4350B 10mil + RO4450F 4mil

Layer count: 4 layers

Type: Control depth Back drill L2-L4

Format: 100mm x 90mm = 1 type = 1 piece

Surface finish: Immersion gold

Copper weight: Outer layer 35 μm/ Inner layer 35 μm

Solder mask / Legend: Green / White

Final PCB height: 2.1 mm

Standard: IPC 6012 Class 2

Packing: 20 panels are packed for shipment.

Lead time: 10 working days

Shelf life: 6 months

Stack up:

 

We can provide you with prototypes, small runs and mass production services. If you have any enquiries, please feel free to contact me.

 

Best regards

 

Ivy Deng | Business development

Bicheng PCB | sales10@bichengpcb.com |Material partners: Rogers, ITEQ, SHENGYI, TAIYO, KUANGSHUN

If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as "remove" in the subject line.

 

Bicheng is located at Baoan, Shenzhen, China 518103.

4 Layer PCB Built On 10mil RO4350B+FR4 Mixed multiblock

High Frequency PCB Built on Rogers 32mil (0.813mm) RO4003C

 

Hi,

Rogers RO4003C RF PCB may be your interest.

 

PCB Board information:

Core Material: 32mil (0.813mm) RO4003C

Board Thickness: 0.9mm)±0.1mm

Copper Weight:   1 oz each layer

Number of Layers: 2 Layers

LPI Solder Mask: Solder mask on top and bottom

Finish: Immersion gold

BBT:      Yes, 100% tested

Board size: 184 x 212mm=3 types=3 pieces

 

PCB Capability

PCB Material:	Glass reinforced hydrocarbon ceramic laminates
Code:	RO4003C
Dielectric constant:	3.38  ±0.05 (process)
	3.55 (design)
Layer count:	1 Layer, 2 Layer, Multilayer, Hybrid type (Mixed)
Copper weight:	0.5oz (17 µm), 1oz (35µm), 2oz (70µm)
PCB thickness:	8mil (0.203mm), 12mil (0.305mm), 20mil (0.508mm)
	32mil (0.813mm), 60mil (1.524mm)
PCB size:	≤400mm X 500mm
Solder mask:	Green, Black, Blue, Yellow, Red etc.
Surface finish:	Bare copper, HASL, ENIG, Immersion tin, OSP,etc.

 

We can provide you with prototypes, small runs and mass production services. If you have any enquiries, please feel free to contact me.

 

Best regards

Ivy Deng | Business development

Bicheng PCB | sales10@bichengpcb.com |Material partners: Rogers, ITEQ, SHENGYI, TAIYO, KUANGSHUN

If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as "remove" in the subject line.

 

Bicheng is located at Baoan, Shenzhen, China 518103.

4 Layer High Frequency PCB Built On 20mil RO4350B With Back Drilling

6-Layer High Frequency PCB Built on 3 Cores of Rogers 20mil RO4003C

 

Hi,

 

PCB built on all low loss material has the notable advantages of less signal transmission loss than other materials. RO4003C has low dielectric constant and good signal transmission and gold surface has good oxidation resistance and good heat dissipation.

 

Basic Specifications:

Base Material:      RO4003C+RO4450F

Copper Weight:   1 oz each layer

Board Thickness: 2.0 mm ±10%

Layer Count: 6 layers

Board Size:   129 x 75 mm = 1up

Solder Mask:       Green solder mask | white silkscreen

Surface Finish:    Immersion gold

Via: Through hole, no Blind via

Warpage:      ＜0.75% warpage

Net Weight:   0.032 kg/pcs

Acceptable Standard:  IPC-Class-2

Lead time for prototype:    12 working days

Shelf life:      6 months

 

Stack up, 6 Layer

Contact us today for more preferential price.

 

Best regards

 

Ivy Deng | Business development

Bicheng PCB | sales10@bichengpcb.com |Material partners: Rogers, ITEQ, SHENGYI, TAIYO, KUANGSHUN

If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as "remove" in the subject line.

 

Bicheng is located at Baoan, Shenzhen, China 518103.